FAN Screw Press Separators

Manure solid separator

Separator PSS 1.2 and 3.2

The FAN series PSS 1.2 and PSS 3.2 are ideally suited for farms with moderate to high separation volume, and they number among the most popular separator models in the world. They are commonly used in both agricultural and industrial contexts, helping their users reduce environmental impact and lower costs. Separation reduces the volume of waste, which simplifies disposal and enables reuse of the substrate.

Energy-Efficient Separation

The machines achieve a throughput of up to 60 m³ (PSS 1.2) or 100 m³ (PSS 3.2) per hour and guarantee energy-efficient separation of the substrate. The actual throughput depends on the material being separated, the input consistency and the sieve gap width. The liquid phase (70-85%) can be optimally utilised as irrigation water. The solid phase (15-30%) – self-composting, odourless and stackable for easy storage – can be sold as fertiliser or compost. FAN also offers the stainless steel (V4A) series 5.2, which is technically identical to the PSS 3.2 models.

Ideal Results

The fibrous solid is separated from the liquid in the area of the slotted sieve. The fibres form a filter layer that can filter even finer particles out of the liquid. The screw blades transport the filter layer to the solid discharge point. This cleans the sieve surface, allowing a new filter layer to form. Blockages cannot occur thanks to the tight tolerances of the sieve cylinder. The pressure in the first section of the sieve is low, but it increases up to the solid discharge point as the solid concentration rises. The back pressure required in the last section of the machine for dewatering is generated by the discharge regulator and the resulting friction in the mouthpiece. The solid concentration in the separated solid fraction can be regulated by adjusting the number and positioning of the counterweights (patented discharge regulator).

Clever Principle

The PSS separators are generally fed from a holding pit by means of a pump. However, they can also be fed via a hopper. The optimal input type depends on the consistency of the raw material and the local conditions. An oscillation unit (patented) is situated in the input area to ensure even feeding, which significantly improves the throughput for viscous media in particular.

FAN Big John Separator

BIG JOHN

New Press Screw Separator from FAN produces bedding material with a dry matter content of up to 38% in solids.

Benefits

  • Dry matter content up to 38% in solids when separating cattle slurry
  • Economical production of high-quality bedding from the manure solids already on the farm. No need to buy additional bedding
  • High dry matter content even at high throughput rates
  • Low energy consumption
  • Press screw and screen basket made of stainless steel
  • Long life of the auger due to hard metal coating
  • Including automatic weight control
  • Including control panel
FAN PSS 8 Separator

PSS 8

With the PSS 8, FAN is opening a new chapter in the history of separation: The remarkable throughput of the PSS 8, by far the largest of the PSS range, makes it predestined for larger farms, such as biogas production or dairy farming, but also for industrial applications and contractors. Thanks to the increased impact of a single machine, energy, space, usage, costs and labour related to infrastructure and peripheral devices are saved and the ecological footprint is reduced.

A Separator Shows Greatness

With its impressive dimensions of 3.6 x 0.9 and a height of 1.3 m up to the inlet, the PSS 8 separator, developed for continuous operation on large farms, is an extremely robust machine. The proven FAN press screw concept has been retained while the components have been enlarged: The 2200 mm long and 350 kg heavy auger is additionally supported by a head bearing. With a diameter of 400mm, the sieve is also generously sized. The built-in auger is driven by a 30 kW electric motor running at 400V/50Hz. This ensures worldwide use for different applications.